Info: +36-30/6701767 (H-P.: 8-18 óráig!)
QED QE1910 Airloc banándugóval (lásd a képek között), általunk szerelt kivitel, mely esetében a QED speciálisan erre a célra létrehozott P-AT1 Airloc Crimp Tool segítségével kerül installálásra a banándugó a kábel végére. Ebből fakadóan gyári csomagolással nem rendelkezik a hangfalkábel. A minőségi QED XT400 hangfal kábel a QED referencia hangfalkábel családjának tagja.
QED Reference XT400 hangfalkábel részletes leírása:
QED's multi award winning XT400 Speaker cable, utilising X-Tube™ Technology Silver-plated oxygen-free copper tubular conductor geometry.
For use in the finest hi-fi and home theatre systems. This design delivers a massive cross-sectional area using X-TubeTM technology to eliminate the skin effect whilst maintaining a user friendly “figure of 8” geometry. This is QED’s ultimate affordable upgrade for high end systems.
Provides a low frequency path for the audio signal and delivers stunning high frequency detail
At low frequencies both X-Tube™ and conventional stranded/solid core speaker cables convey signals in a linear way. However, at high frequencies, X-TubeTM retains a near-linear signal transfer, whereas the conventional cables fail to conduct uniformly across the entire conductor area.
In standard speaker cables at high frequencies current flow is highest at the periphery with rapidly deteriorating current density towards the centre of the conductor.
The effect of this is to reduce the actual cross sectional area of the cable at 15kHz to less than 75% of that at low frequencies. This results in higher distortion and compromises the performance of the cable.
X-TubeTM with polycore technology exhibits much lower self-inductance and is therefore less affected by this problem. The polycore technology reduces loop inductance to levels only achievable using more costly and difficult to terminate cables.
The result is more high frequency detail, less distortion and greater performance.
This cable is professionally terminated by Futureshop's expert engineers using QED's superb 24 Carat gold plated AIRLOC termination plugs.
AIRLOC is QED's specialised loudspeaker termination method and offers the very best termination with QED speaker cables. This is a solder-free, airtight fusion between the cable and plug offering optimum signal transfer, excellent signal quality and perfect long-term performance.
QED’s AIRLOC FORTE metal banana and spade plugs deliver a superior performance over many plugs offered by rival manufacturers for the following reasons. Firstly, the plug is crimped around the conductors under high pressure using a special tool supplied by QED. No soldering is used and as a result the conductors are in contact with the plug 360 degrees which maximises the surface area contact. Furthermore, the banana plug itself is in contact with the binding post again at 360 degrees. The net effect of this is it maximises the signal transfer from the plug into your equipment and hence a superior performance. When bare wire is used not all the conductors are in contact with the binding post and as a result some loss occurs.
Unfortunately the metal barrels for the AIRLOC spades were discontinued in 2012 however we still use genuine QED’s AIRLOC spade plugs with genuine QED heat shrinks over the spade plugs. This ensures every QED speaker cable comes fully terminated with the best of QED's engineering.